The Weldmark® by Victor® Oxygen/Acetylene 3-101 Oxy-Fuel Size 0 Cutting Tip has a cutting capacity of 0.50 inch. This general purpose type 3-101 series tip is one piece. It is ideal for hand or machine cutting. It is compatible with CA1350/51/52, CA1260, and CA411-3 cutting attachments, and is capable of cutting 20-28 inches per minute, with an average kerf width of 0.06 inches. It's designed for use with acetylene gas, with a max acetylene gas pressure of 5, and a max oxygen cutting pressure of 35. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut
